Chapter 3-3: Road markings

The ICBC driving test includes a section on road markings, assessing your knowledge of the lines and symbols painted on British Columbia’s roads.

BC Driving Test - Chapter 3-3: Road markings

1 / 15

Reserved lane markings with a white diamond symbol typically indicate:

A lane for trucks only

A lane for high-occupancy vehicles (HOVs), buses, or bicycles as specified

A temporary construction lane

A passing lane for faster cars

2 / 15

A broken yellow line beside a solid yellow line means:

You may pass only when it is safe and the broken line is on your side

Only emergency vehicles may pass

No passing allowed from either direction

Passing is allowed from either direction at any time

3 / 15

A stop line painted across your lane means:

You only stop if pedestrians are present

You can ignore it if turning right

You must stop before this line

You may stop after crossing the line

4 / 15

A double solid yellow line means:

No passing allowed

Passing allowed only for trucks

Passing allowed in both directions

Passing allowed only during daylight

5 / 15

Freshly painted, wet pavement markings:

Are only a suggestion and may be ignored

Apply only to commercial vehicles

Must not be driven over because it is illegal

May be driven over if you are turning

6 / 15

A broken yellow line between lanes of traffic means:

Passing is never allowed

You must turn left

Passing is allowed when safe

Only buses may pass

7 / 15

A broken white line between lanes of traffic means:

Lane changing is allowed when safe

Lane changing is never allowed

You must stay in that lane until the next light

Only buses may change lanes

8 / 15

A single yellow line means:

Passing is allowed with extra caution

Passing is never allowed

You must stop and yield

Only left turns are allowed

9 / 15

The two-way left-turn lane is used for:

Drivers travelling in opposite directions who are making left turns

Passing slower vehicles

Bicycle traffic only

Emergency stopping only

10 / 15

Yellow lines on the road are used to:

Mark the right shoulder of the highway

Divide traffic moving in opposite directions

Mark pedestrian crosswalks only

Separate lanes moving in the same direction

11 / 15

At a pedestrian-activated crosswalk with illuminating lights in the pavement, you must:

Yield only if another vehicle has already stopped

Stop for pedestrians in the crosswalk

Proceed because the lights are only a warning

Continue if you do not see a stop sign

12 / 15

When approaching a marked pedestrian crosswalk, you must:

Honk to warn pedestrians to move

Only slow down, never stop

Proceed if you do not see a traffic light

Stop for pedestrians in the crosswalk

13 / 15

A solid white line between lanes of traffic means:

Do not change lanes

Passing is required

Lane changing is allowed whenever you want

You must turn right at the next intersection

14 / 15

White lines on the roadway are used primarily to:

Separate lanes of traffic moving in the same direction

Mark only pedestrian-only streets

Divide traffic moving in opposite directions

Indicate no passing zones in both directions

15 / 15

A double broken yellow line usually indicates:

A school zone where passing is banned

A shoulder you may drive on

A reversible lane controlled by lane signals

A bus-only lane

Your score is

This section covers solid and broken lines, crosswalks, stop lines, arrows, and bicycle lanes. Understanding these markings helps you know where to stop, when you can pass, and which lanes to use. Proper interpretation ensures you follow traffic rules and avoid unsafe maneuvers. To prepare, study the ICBC driving guide and observe road markings during your practice drives. Mastering this section is essential for passing the test and driving safely in real-world conditions.

Taking time to review the ICBC Knowledge Test questions is essential. Analyzing each question can aid in understanding the correct answers and the underlying concepts. Consistent practice is fundamental for mastering the material. Being able to explain the concepts without referring to notes can enhance comprehension of the subject.