Chapter 3-1a: Signal Lights

The Quebec driving test evaluates your understanding of traffic rules, including the crucial section on signal lights.

Quebec Driving Test -Chapter 3-1a: Signal Lights

1 / 30

What does a yellow (amber) light indicate?

The light will soon turn red, and you must stop.

You have permission to turn left.

Proceed with extreme caution.

The light will soon turn green.

2 / 30

Under what circumstance can you proceed through a yellow light?

If you are in a hurry.

If you are turning right.

If you are already in the intersection or so close that you cannot stop safely.

If there are no other cars around.

3 / 30

If a pedestrian is already in the intersection when the orange hand begins to flash, what should they do?

Hurry to reach the sidewalk or median.

Wait for a vehicle to stop for them.

Go back to the curb they started from.

Stop immediately and wait.

4 / 30

If there is no stop line or pedestrian crosswalk, where should you stop for a red light?

Directly under the traffic light.

Before the edge of the roadway you are preparing to cross.

In the middle of the intersection.

At least 10 meters before the intersection.

5 / 30

What do flashing yellow lights accompanying a regulatory sign do?

Indicate the sign is optional.

Show that the sign is new.

Cancel the obligation of the sign.

Direct attention to a danger or an obligation.

6 / 30

What information does the time counter on a pedestrian light provide?

The time remaining for vehicles to stop.

The time remaining for pedestrians to cross the intersection.

How long until the next walk signal.

The current time of day.

7 / 30

What does a downward green arrow lane use signal mean?

You may use the lane under the signal.

You must turn right from this lane.

You must stop before entering the lane.

The lane is ending, merge into another lane.

8 / 30

Flashing red lights are often used in conjunction with what other traffic control device?

Stop signs.

Green arrows.

Yield signs.

Speed limit signs.

9 / 30

What does a green arrow, whether flashing or not, indicate?

You must proceed in the direction indicated by the arrow.

You have the right of way over all other traffic.

You must stop and wait for a solid green light.

You may proceed cautiously in any direction.

10 / 30

What do the colors of the bicycles on cyclist lights correspond to?

The direction of the bike lane.

The level of danger at the intersection.

The same meaning as standard traffic lights (red, yellow, green).

The speed limit for bicycles.

11 / 30

What does a red 'X' signal above a traffic lane mean?

The lane is for emergency vehicles only.

You may not drive or stop in the lane under the signal.

You must slow down significantly in this lane.

The lane is about to open for traffic.

12 / 30

What does a red arrow signal prohibit?

Proceeding straight.

Going in the direction to which the arrow points.

Stopping in the intersection.

All turns.

13 / 30

What does a flashing green light indicate?

Proceed with caution, the light will soon be yellow.

The traffic light is broken.

Left turns are protected, and oncoming vehicles are stopped.

All traffic must stop.

14 / 30

How must a motorist react to a flashing red light?

Stop and wait for it to turn green.

Slow down and proceed with caution.

Come to a complete stop and yield the right of way before proceeding.

Treat it as a yield sign.

15 / 30

What is the purpose of lane use lights?

To light up the road for better visibility.

To indicate the speed limit for each lane.

To show which lanes are reserved for buses.

To indicate whether vehicle traffic is permitted or prohibited in specific lanes.

16 / 30

What is the function of a yellow arrow?

It indicates a protected turn is about to begin.

It has the same function as a yellow light but applies to a specific direction.

It means you must yield to oncoming traffic.

It indicates the lane is about to close.

17 / 30

What must a driver do when traffic lights are defective or not in operation?

Act as though the intersection were controlled by stop signs for all directions.

Proceed with caution as if it were a green light.

Wait for a police officer to direct traffic.

Yield to traffic on the right and then proceed.

18 / 30

What should a pedestrian already in the intersection do when the pedestrian silhouette starts flashing?

Continue walking at a normal pace.

Return to the original sidewalk.

Hurry to reach the sidewalk or median.

Stop in the middle of the road.

19 / 30

What does the solid pedestrian silhouette (walking person) mean?

Only visually impaired pedestrians may cross.

Pedestrians should prepare to cross.

Pedestrians may cross the roadway in the designated area.

Pedestrians must wait for the light to change.

20 / 30

If there are no pedestrian lights, what must a pedestrian do at a red traffic light?

They have the right of way to cross.

Cross with caution.

They must also stop.

Wait for a gap in traffic.

21 / 30

What is the purpose of flashing yellow or red lights at an intersection?

To indicate a school zone.

To show that only emergency vehicles may proceed.

To indicate a particularly dangerous intersection.

To signal that the main traffic lights are out of service.

22 / 30

What is the difference between a standard pedestrian light and a countdown light?

Countdown lights have a third lamp showing the time left to cross.

Standard lights use colors, countdown lights use symbols.

Standard lights are for busy intersections, countdown lights are for quiet ones.

There is no difference.

23 / 30

What is the primary function of pedestrian lights?

To provide light for pedestrians at night.

To signal to drivers when pedestrians are present.

To regulate pedestrian movement and help them avoid conflicts with vehicles.

To slow down vehicle traffic.

24 / 30

If you are facing a green light, who must you yield to?

No one, you have the absolute right of way.

Vehicles, cyclists, and pedestrians already in the intersection.

Only vehicles coming from the right.

Vehicles turning left.

25 / 30

Which of the following is NOT listed as a type of signal light in the text?

Railway crossing lights.

Highway toll booth lights.

Priority lights for buses.

Inspection station lights.

26 / 30

What does a solid red traffic light mean for motorists and cyclists?

Stop only if there is cross-traffic.

Bring their vehicle to a full stop before the crosswalk or stop line.

Stop and then proceed if the way is clear.

Slow down and prepare to stop.

27 / 30

What does the solid orange hand signal warn pedestrians?

Not to enter the intersection.

That the light is about to change to the silhouette.

To hurry across the street.

To wait for an audio signal.

28 / 30

What does a horizontal yellow arrow lane use signal indicate?

The lane is now open in both directions.

You must stop immediately.

You may use the lane for turning only.

You must cautiously change lanes because the current one is closing ahead.

29 / 30

What is the correct action for a motorist approaching a flashing yellow light?

Slow down and proceed after yielding to road users already in the intersection.

Treat it as a green light.

Maintain speed and continue through.

Stop completely before proceeding.

30 / 30

When facing a solid green light, what must motorists do before proceeding?

Wait for 5 seconds before moving.

Proceed immediately without stopping.

Honk to alert pedestrians.

Yield the right of way to vehicles and pedestrians already in the intersection.

Your score is

Knowing how to interpret and respond to red, yellow, and green lights is essential for safety. A steady red means stop, while a flashing red acts like a stop sign. Yellow lights warn that the signal will soon turn red. A green light allows you to proceed if the way is clear, but you must always yield to pedestrians. Mastery of these signals helps ensure smooth traffic flow and is a key component of passing the test.

To pass the SAAQ Knowledge Test, it is important to understand the concepts rather than just memorize them. Set up a regular study routine and try to explain ideas in your own words. This will help you understand better and feel more confident. Take a proactive approach to your studies to get the results you want.