Section 1-2a: Starting from a parked position, lane changing, curves, and turning

The Manitoba MPI driving test includes a section focused on starting from a parked position, lane changing, curves, and turning.

Manitoba Driving Test - Section 1-2a: Starting from a parked position, lane changing, curves, and turning

1 / 30

In an automatic transmission, what must you do before shifting from a forward gear to reverse?

Press the accelerator lightly.

Shift into Neutral first.

Bring the vehicle to a complete stop.

Turn the engine off and on again.

2 / 30

What is the first thing a driver must do before moving from a parked position on a street?

Check the rearview mirror only.

Honk the horn.

Move out slowly without signaling.

Turn on the signal furthest from the curb.

3 / 30

What does the text state is required before moving away from a straight line, such as when maneuvering past parked vehicles?

Signals and checks.

Flashing your headlights.

A gradual increase in speed.

Honking the horn.

4 / 30

What is the 'friction point' in a manual transmission vehicle?

The highest RPM the engine can reach.

The point where the tires lose traction.

The point where the clutch begins to re-engage the engine and transmission.

The point where the brake pads touch the rotor.

5 / 30

What does releasing the clutch too quickly in a manual car risk?

Stalling the engine or damaging components.

Improving fuel efficiency.

Overheating the engine.

Wearing out the tires.

6 / 30

Why is the 9 and 3 o'clock steering position recommended for vehicles with airbags?

It provides the most leverage for sharp turns.

It keeps the driver's arms out of the airbag's deployment path.

It allows for one-handed driving.

It is the most comfortable position for long drives.

7 / 30

What is the term for leaving your foot on the clutch pedal unnecessarily while driving?

Coasting

Lugging the engine

Riding the clutch

Palming the wheel

8 / 30

What can happen if a vehicle is over-accelerated on a slippery road surface?

The engine can stall.

The transmission can be damaged.

The brakes will automatically engage.

The wheels can lose traction, causing a loss of control.

9 / 30

What happens if an engine 'races' in a manual transmission vehicle?

The vehicle accelerates smoothly.

The vehicle moves in a rough, bumpy fashion.

The engine revs but does not move the car effectively.

The engine is about to stall.

10 / 30

In a manual transmission car, what should you do if the engine begins to 'lug'?

Press the clutch pedal down.

Shift to a lower gear.

Shift to a higher gear.

Press the accelerator harder.

11 / 30

What is the recommended hand position on the steering wheel for optimal control?

12 o'clock with one hand

9 o'clock and 3 o'clock

10 o'clock and 2 o'clock

6 o'clock and 4 o'clock

12 / 30

In an automatic transmission vehicle, what is a primary benefit of downshifting when descending a steep hill?

It improves fuel economy.

It helps keep the brakes cooler.

It allows for faster acceleration at the bottom of the hill.

It charges the vehicle's battery.

13 / 30

What should you avoid doing with the clutch when braking or coming to a stop in a manual vehicle?

Depressing it too soon to avoid coasting.

Depressing it fully at the last second.

Depressing it at all.

Using your right foot to press it.

14 / 30

What is the consequence of holding a manual car on a hill using only the clutch?

It causes the clutch to heat excessively and wear out prematurely.

It helps to cool the engine.

It saves the brakes from wear.

It is the recommended method for hill starts.

15 / 30

Under what condition is it acceptable to change multiple lanes with a single signal and shoulder check?

When traffic is light.

On a highway with more than four lanes.

When the movement can be completed safely.

It is never acceptable.

16 / 30

If you enter a curve too fast, what is the recommended action?

Apply the brakes carefully to maintain control.

Jam on the brakes immediately.

Shift into neutral and coast.

Accelerate through the curve.

17 / 30

When entering a left-hand curve, you should steer...

in a straight line until the last moment.

toward, but not over, the centre of the road.

toward the right side of the road.

over the centre line.

18 / 30

What is the function of the clutch in a manual transmission vehicle?

To directly change the gear.

To engage the parking brake.

To connect or disconnect the engine from the transmission.

To increase engine power.

19 / 30

According to the text, what steering technique should a driver never use?

Using both hands

Palming the wheel with one hand

Keeping hands at 9 and 3

The push-pull method

20 / 30

What checks are required before changing lanes?

Signal, check rearview mirror, and then shoulder check for blind spots.

Check rearview mirror only.

Signal and then move immediately.

A shoulder check only.

21 / 30

When starting the engine of a vehicle with a manual transmission, your left foot should be...

on the floor.

on the brake pedal.

on the accelerator.

fully depressing the clutch pedal.

22 / 30

According to the text, where should you never change lanes?

On a one-way street

In a school zone

On a highway

At intersections

23 / 30

What is the recommended position for the driver's foot on the accelerator?

Foot flat on the accelerator with the heel on the floor.

The heel on the pedal and toes on the floor.

The side of the foot on the pedal.

Only the toes on the pedal.

24 / 30

When entering a right-hand curve, where should you steer the vehicle?

Toward the left side of the road.

Directly down the middle of your lane.

Toward the centre of the road.

Toward the right side of the road.

25 / 30

Before starting the engine of a manual transmission vehicle, the gear selector should be in neutral and the clutch pedal should be...

halfway down.

fully depressed.

pumped twice.

not touched.

26 / 30

When should a driver slow down for a curve?

After exiting the curve.

Before entering the curve.

At the sharpest point of the curve.

While in the middle of the curve.

27 / 30

How should a driver use the accelerator when starting from a stop?

Use only the toe to press it

Press it down quickly and fully

Pump it several times

Apply pressure smoothly and gradually

28 / 30

If you are unable to perform a shoulder check and must use mirrors only, how many lanes can you change at a time?

One lane at a time.

As many as are clear.

Two lanes.

You should not change lanes at all.

29 / 30

What is the purpose of the 'N' (Neutral) gear on an automatic transmission?

For normal forward driving.

For backing up.

For parking on a hill.

To disengage the engine from the drive wheels.

30 / 30

Which gear in an automatic transmission is used for starting the engine and stopping for an extended period?

P (Park)

R (Reverse)

D (Drive)

N (Neutral)

Your score is

Drivers must demonstrate smooth starts by signaling, checking mirrors, and shoulder-checking before moving. Proper lane changing requires signaling, checking blind spots, and smoothly merging without disrupting traffic. Navigating curves tests the driver’s control, requiring appropriate speed and steering. Turning demands correct signaling, positioning, and observation of traffic signs and pedestrians. Performing these tasks safely and confidently shows the examiner you are ready for Manitoba’s roads, making this section essential for passing the test.