Chapter 8-6: Railway crossings

The “Railway crossings” section of the Alberta Class 7 Practice Exam focuses on the rules and safety precautions necessary for crossing train tracks.

Alberta Driving Test - Chapter 8-6: Railway crossings

1 / 12

At a railway crossing with a stop sign, how far from the nearest rail must you stop?

Directly beside the rail to check for trains

Between five metres and 15 metres from the nearest rail

Any distance, as long as you can see both ways

Exactly one metre from the nearest rail

2 / 12

If your vehicle stalls on a railway crossing and a train is coming, what should you do?

Push the vehicle off the tracks regardless of the train’s distance

Stay in the vehicle and try to restart it

Get everyone out and move well away from the vehicle and tracks, preferably toward the direction the train is coming from

Stand beside the vehicle and signal the train to stop

3 / 12

What must you do at a railway crossing that has gates (arms), lights, and bells?

Stop only if the gates are fully down

Remain stopped until the gates are raised and the lights and bells stop

Proceed as soon as the train engine passes

Drive around the gates if you do not see a train

4 / 12

When must you stop at a railway crossing with a railway crossing sign (no lights or gates)?

Only at night

Only when other vehicles are stopped

Only when a flag person is present

When a train is visible or sounding a signal and approaching within 500 metres

5 / 12

What is a key safety rule about driving near railway crossing gates?

You may drive around the gates if no bells are ringing

You may drive around the gates if you are in a hurry

Never drive around the gates, whether they are down, raising, or lowering

You may drive around the gates if the lights have stopped flashing

6 / 12

Where must you stop if there is a stop line before a railway crossing and a train is approaching?

Before the stop line

Anywhere as long as you can see the train

Directly on the stop line

Past the stop line but before the tracks

7 / 12

What is recommended for vehicles with a manual (standard) transmission when crossing railway tracks?

Do not change gears while crossing the tracks

Always shift gears in the middle of the tracks

Stop on the tracks to change gears

Keep the clutch pressed the entire time on the tracks

8 / 12

What must you do when red lights begin to flash and bells ring at a railway crossing?

Speed up to clear the tracks before the train arrives

Stop at least five metres back from the nearest rail and remain stopped until the lights and bells stop and the train has passed or stopped

Stop only if other vehicles are already stopped

Slow down but continue if you don’t see a train

9 / 12

What does the speed sign below an advance railway warning sign indicate?

The recommended speed for safely crossing the railway

The minimum speed you must travel

The speed of approaching trains

The maximum speed limit for the entire road

10 / 12

What does a railway crossing sign (crossbuck) at a public crossing mean for drivers?

They must yield to all trains

They must stop at all times, even if no train is present

They may proceed without looking if no lights are flashing

They have right-of-way over trains

11 / 12

What should you always do when approaching a railway crossing with an advance warning sign?

Look, listen, and reduce speed because you may have to stop for a train

Turn on hazard lights and change lanes

Maintain the posted road speed and proceed

Stop immediately, regardless of traffic or trains

12 / 12

When driving at night or in poor weather near railway tracks, what is an important safety practice?

Only slow down if you see flashing red lights

Maintain the posted speed limit at all times

Drive at a speed that allows you to stop within the distance clearly lit by your headlights

Rely on train horns to alert you

Your score is

This section tests learners’ ability to identify railway signs, understand the meaning of flashing lights, and know when to stop and wait for passing trains. It emphasizes the importance of never attempting to cross when signals are active, or gates are down and highlights the need to look both ways before proceeding. By mastering this section, new drivers become more alert and cautious, reducing the risk of dangerous collisions and ensuring everyone’s safety at railway crossings.

Taking your time with the Alberta Learners Practice Test questions is essential. Dive deeply into each question to understand not only the correct answers but also the reasoning behind them. Regular practice is key to mastering the material. Keep working at it until you can explain everything from memory without referring to your notes! This approach will help solidify your understanding of the subject.