Chapter 10-2: Equipment

The “Equipment” section of the Alberta Class 7 knowledge test focuses on the essential features and maintenance of a vehicle required by law.

Alberta Driving Test - Chapter 10-2: Equipment

1 / 6

How must safety chains be attached when using a ball-and-socket hitch (except on fifth-wheel trailers)?

Connected only on one side of the trailer frame.

Attached straight and parallel to the tongue.

Wrapped loosely around the hitch ball.

Crossed under the tongue of the trailer and fastened securely.

2 / 6

In addition to the 910 kg rule, which other trailer does NOT require brakes?

A trailer pulled by a large pickup truck.

A trailer whose gross weight is less than half the unloaded weight of the towing vehicle.

A trailer carrying only light, bulky items.

Any trailer used below 60 km/h.

3 / 6

When must you use extension mirrors on your towing vehicle?

Only when the trailer has brakes.

Only when driving at night.

When the trailer is wider than the towing vehicle.

When towing any trailer, regardless of width.

4 / 6

What should you do if your trailer has a secondary emergency breakaway system?

Remove it if the trailer has safety chains.

Leave it disconnected unless on the highway.

Use it only if the main brakes fail.

Connect it properly according to the manufacturer’s instructions.

5 / 6

Which trailer does NOT require brakes?

A trailer with any gross weight under 4,500 kilograms (9,921 pounds).

Any trailer used only for short trips.

A trailer with a gross weight of 910 kilograms (2,000 pounds) or less.

Any trailer with functioning lights and chains.

6 / 6

When towing a trailer, what must be true of its tail-lights, brake lights, and turn signals?

They must be working and activated from the towing vehicle.

They are optional on small trailers.

They only need to work in daylight.

They only need to work if the trailer has brakes.

Your score is

This section covers topics such as functioning headlights, brake lights, mirrors, brakes, seat belts, and tires. It also emphasizes the importance of keeping all equipment in good working order to ensure the safety of both the driver and others on the road. Understanding these requirements helps new drivers recognize the need for regular vehicle inspections and prompt repairs. By mastering this section, drivers are better prepared to maintain their vehicles’ roadworthiness and comply with Alberta’s safety standards.