Chapter 5-4: Entering and exiting a major roadway

The “Entering and Exiting a Major Roadway” section of the Alberta Class 7 knowledge test evaluates a driver’s understanding of safe merging and exit procedures.

Alberta Driving Test - Chapter 5-4: Entering and exiting a major roadway

1 / 25

What is a helpful technique for controlling speed when driving down a steep hill in a vehicle with a standard transmission?

Use the emergency brake

Shift to a higher gear

Turn off the engine

Shift to a lower gear to reduce brake overheating

2 / 25

If you are on the main roadway and traffic is merging, what should you do if it is safe?

Move left to the next lane to clear the right travel lane

Stop abruptly to let merging vehicles in

Ignore merging vehicles

Speed up to prevent merging

3 / 25

If your vehicle skids on a right curve towards oncoming traffic, what is the recommended action?

Accelerate quickly out of the skid

Turn the steering wheel sharply left

Slam on the brakes

Stay off the brake and accelerator, look where you want to go, make small steering adjustments

4 / 25

When should you use your signal light while merging?

After merging into the lane

Only if other vehicles are nearby

Signal lights are not necessary when merging

Before or when you are in the acceleration lane

5 / 25

How do wet or icy roads affect driving on curves?

They have no effect on curves

They require no change in driving behavior

They make curves slippery and increase the risk of danger

They make curves easier to navigate

6 / 25

Is it legal and safe to pass other vehicles on curves on highways with one lane in each direction?

No, it is unsafe and illegal

Yes, if the vehicle ahead is moving slowly

Only during the day

Yes, if you signal first

7 / 25

What is an important action to take while merging to ensure safe lane entry?

Signal only after merging

Keep shoulder checking and use rear view mirrors

Stop halfway through the merge

Ignore vehicles behind you

8 / 25

When exiting a highway, where should most of your slowing occur if there is a deceleration lane?

On the main highway before the exit

After the exit ramp ends

In the deceleration lane

You should not slow down

9 / 25

How should you prepare to exit a major roadway or highway?

Wait until the last moment to change lanes

Be in the proper lane well before you reach your exit

Stop before reaching the exit

Signal only after passing the exit

10 / 25

What is the shared responsibility during merging?

Neither vehicle should adjust speed

Only the merging vehicle must yield

Both the merging vehicle and the vehicles already on the highway cooperate

Only the vehicles on the highway must yield

11 / 25

When approaching the top of a hill, what should you do?

Move to the left lane

Stop and look ahead

Use caution and move to the right in your lane

Speed up to pass other vehicles

12 / 25

How should you adjust your speed when traveling down a steep hill?

Stop midway down the hill

Adjust speed to account for increased stopping distance

Maintain the same speed as uphill

Speed up to get down quickly

13 / 25

Why should you not pass near the top of a hill on a two-lane highway?

You cannot see what is ahead of you

Because vehicles are moving slower

Passing is easier there

It is allowed and safe

14 / 25

What should you do if the deceleration lane is short when exiting a highway?

Start reducing your speed while still on the highway

Accelerate to exit quickly

Use the emergency lane to slow down

Stop abruptly before the exit

15 / 25

What is the danger of abruptly slowing or stopping in a merging lane?

It is recommended in heavy traffic

Your vehicle may be hit from behind

It helps other drivers merge easier

It is required by law

16 / 25

What should you avoid doing when merging onto a highway?

Abruptly reducing your speed or stopping

Accelerating to the speed of traffic

Using your signal light

Checking your mirrors

17 / 25

What should you do with your signal light after merging or exiting?

Ensure it is turned off

Leave it on for several minutes

Use hazard lights instead

Only turn it off if other vehicles are nearby

18 / 25

When merging onto a highway, who has the right-of-way?

The vehicle closest to the merging lane

The merging vehicle

Neither the merging vehicle nor the vehicles already on the highway

The vehicles already on the highway

19 / 25

What is a weave zone?

An area where highway entrance and exit lanes share the same lane

A lane for emergency vehicles only

A rest area on the highway

A lane for vehicles traveling above the speed limit

20 / 25

If your vehicle begins to skid to the right on a left curve, what should you do?

Turn the steering wheel sharply right

Stay off the accelerator and brake

Brake hard immediately

Accelerate to regain control

21 / 25

When driving on curves, when should you reduce your speed?

While in the middle of the curve

You should not reduce speed

After exiting the curve

Before entering the curve

22 / 25

What is the purpose of the acceleration lane when merging?

To change lanes multiple times

To reduce speed significantly

To allow your vehicle to reach the posted speed limit of the road you are merging onto

To come to a complete stop before merging

23 / 25

How can you stay centered in your lane on a curve?

Look well ahead and around the curve

Focus only on the vehicle in front of you

Keep your eyes closed briefly

Look directly at the curb

24 / 25

What should you do if you miss your exit on a highway?

Make a U-turn immediately

Stop and reverse on the highway

Continue to the next exit and plan to return to your route

Stop on the shoulder and wait

25 / 25

What should drivers do in a weave zone?

Stop to let other vehicles pass

Control speed and timing of lane changes to merge safely

Ignore other vehicles entering or exiting

Increase speed to pass other vehicles quickly

Your score is

This section covers the importance of using acceleration and deceleration lanes, signaling intentions early, and checking mirrors and blind spots before merging or exiting. Drivers must know how to adjust speed to match traffic flow and yield appropriately when entering. Proper technique ensures smooth transitions and reduces collision risks. Mastery of this section is vital for new drivers, as it promotes safe integration onto and off major roadways, supporting overall road safety and efficient traffic movement.

It is essential to allocate sufficient time to thoroughly examine the Alberta Learners Practice Test questions. Carefully review each question to comprehend the correct answers and the rationale behind them. Engaging in this practice repeatedly is crucial for mastery. Continue this process until you can articulate the material clearly from memory, without reference to your notes. By doing so, you will achieve a robust understanding of the content.