Chapter 4-7: Turning lanes

The “Turning Lanes” section of the Alberta learner’s permit test assesses knowledge of proper use and navigation of designated turning lanes.

Alberta Driving Test - Chapter 4-7: Turning lanes

1 / 10

What should you watch for when using a two-way left turn lane?

Oncoming vehicles in your lane

Only vehicles behind you

Lane markings at the far end of the road

Only pedestrians on the sidewalk

2 / 10

What is the main purpose of checking signs and pavement markings as you approach an intersection?

To find a place to stop and park

To see how fast other drivers are going

To ensure you are in the correct lane to turn or go straight

To decide which vehicles to follow

3 / 10

When are dual lane turns allowed?

Only where indicated by pavement markings or signs

Only at intersections with traffic lights

At any wide intersection

Only when traffic is heavy

4 / 10

After completing a dual lane turn, what must the driver do if their lane ends when the two lanes converge?

Stop in their lane and wait for a gap

Drive onto the shoulder to continue straight

Change to the available lane using proper lane-change procedures

Speed up so they don’t have to merge

5 / 10

When should you enter a two-way left turn lane?

Only close to where you will be turning

Immediately after you see the lane begin

Only when directed by a police officer

As early as possible to bypass traffic

6 / 10

How must you complete a turn at an intersection with dual lane turns?

Turn into whichever lane has less traffic

Turn into the corresponding lane without swinging wide or changing lanes

Change lanes during the turn if you need to pass

Turn from any lane as long as you signal

7 / 10

At a dual right turn intersection, when may you turn right on a red light (if not prohibited by a sign)?

After coming to a complete stop at the proper stopping point and when the turn can be made safely

Only if the light has just turned red

As long as you slow down and honk your horn

Only if there are no vehicles behind you

8 / 10

Which of the following is part of the safe turning procedure?

Signal only after you start turning

Focus only on vehicles and ignore pedestrians

Rely on other drivers to yield when you turn

Check for traffic, do a shoulder check, signal, and when safe, move into the proper lane

9 / 10

What is permitted to enter a two-way left turn lane?

Using it as a high-speed passing lane

Driving straight through the entire lane

Parking in the lane while waiting for a passenger

Crossing the solid yellow line to enter the shared turn lane

10 / 10

What is a two-way left turn lane?

A lane used only by buses to turn left

A lane used only for emergency vehicles

A lane used only for passing slower traffic

A centre lane shared by vehicles from each direction to turn left

Your score is

Drivers must understand when and how to enter a turning lane, signal intentions, and yield to pedestrians or oncoming traffic as required. Turning lanes are marked to separate turning vehicles from through traffic, reducing congestion and improving safety. Proper lane use prevents confusion and collisions at intersections. The test covers left- and right-turn lanes, including multi-lane intersections and dedicated turn signals. Mastering these rules is crucial for passing the learner’s permit test and for developing safe driving habits in Alberta.