Chapter 3-2: Driving a vehicle with an automatic transmission

The Alberta Class 7 driver learner’s test features a section on “Driving a vehicle with an automatic transmission.”

Alberta Driving Test - Chapter 3-2: Driving a vehicle with an automatic transmission

1 / 10

What is the primary purpose of the lock release on an automatic transmission gear selector?

To reduce the possibility of shifting incorrectly.

To increase the noise of the engine.

To make the vehicle go faster.

To turn on the headlights.

2 / 10

When must the lock release be used to move the gear selector out of Park?

When moving from Neutral to Drive while the gas pedal is presse

Only when the vehicle is turned off.

When moving from Park to Reverse or any forward gear while the brake pedal is presse

Only when driving at highway speeds.

3 / 10

What is the Neutral (N) position mainly used for?

Reversing the vehicle in slippery conditions.

Driving at high speeds to save fuel.

Climbing steep hills at low spee

Towing the vehicle, with no power to the wheels and wheels not locke

4 / 10

What does the Park (P) position do in an automatic transmission?

Allows the vehicle to move backward slowly.

Disengages the engine completely from the wheels for towing.

Provides more power but less spee

Locks the transmission and prevents the wheels from turning.

5 / 10

002--What is a main advantage of a vehicle with an automatic transmission?

It only has one forward gear.

It must be shifted manually at all times.

It cannot change gears at all.

It changes gears on its own as speed changes.

6 / 10

Which statement about Reverse (R) is correct?

It can be used for normal forward driving.

It locks the wheels to prevent movement.

It is the best position for towing the vehicle.

It is used when backing or reversing, and lights at the rear of the vehicle come on.

7 / 10

What is the Drive (D) position used for?

Reversing the vehicle.

Parking on a hill.

Normal forward driving with automatic shifting through the driving gears.

Towing another vehicle.

8 / 10

When should Third, Second, or First gears be used in an automatic transmission?

When more power but less speed is needed, such as on hills or slippery road conditions.

Only when starting the engine.

When cruising at a constant high speed on a highway.

Only when the vehicle is being towe

9 / 10

Where should a driver look for more detailed information about transmission lock release and gear selection?

The vehicle’s owner’s manual.

The fuel door.

The tire sidewalls.

The vehicle’s radio display.

10 / 10

What is the purpose of Overdrive (if the vehicle is equipped with it)?

For locking the wheels when parke

For driving at higher speeds to help save fuel.

For reversing at higher speeds.

For towing the vehicle at low speeds.

Your score is

This part evaluates your understanding of how to operate an automatic vehicle safely and efficiently. Key topics include identifying the gear selector positions (Park, Reverse, Neutral, and Drive), knowing when and how to use each gear, and understanding basic driving techniques such as accelerating, braking, and stopping smoothly. The section also covers safety practices, such as keeping your foot on the brake when shifting gears and never shifting to “Park” while moving. Proper knowledge of these fundamentals is essential for passing the test and driving safely.

To enhance your understanding, it is recommended that you engage with the Alberta Learners Practice Test thoroughly. Go through the test multiple times, focusing on thoroughly grasping the concepts presented. Aim to reach a level of confidence where you can explain the material in detail from memory, without the assistance of your notes. This repetition will solidify your knowledge and prepare you more effectively.