Chapter 2b: Preparing to Ride

The “Preparing to Ride” chapter of the Alberta motorcycle knowledge test is vital for equipping riders with essential safety skills.

Alberta Motorcycle Test - Chapter 2b: Preparing to Ride

1 / 20

A good quality riding rainsuit should:

Not balloon or tear apart at highway speeds

Be made from thin, fragile plastic

Be worn without other clothing underneath

Be open at the bottom of the legs

2 / 20

What type of soles should proper riding footwear have?

Durable material that provides enough grip, even in wet weather

High, narrow heels

Very soft foam soles

Smooth leather soles

3 / 20

What should riders consider using to protect their hearing, especially at highway speeds?

Earplugs

Cotton balls

Only a scarf around the ears

No protection is needed

4 / 20

What type of hand protection is best for motorcycle riding?

Gardening gloves

Gloves designed for motorcycle riding

Mitts

No hand protection

5 / 20

Motorcycle gloves should be:

Thin enough to operate controls, but thick enough to protect in a crash

Too tight to move your fingers easily

Very thick so you cannot feel the controls

Fingerless to improve ventilation

6 / 20

A cold-weather jacket designed for riding should:

Have short sleeves for better movement

Be made only of denim

Be loose at the neck and wrists for comfort

Resist wind and fit snugly at the neck and wrists

7 / 20

Proper riding gloves should:

Cover your wrists and overlap the sleeves of the jacket

Be made only of cloth

Be worn only in cold weather

Stop below the wrist

8 / 20

What will make you more visible at night?

Turning off your headlight

Riding without signals

Reflective strips on your motorcycle and clothing

Dark coloured clothing

9 / 20

Why are short, lightweight pants and nylon materials not recommended for riding?

They are too warm in hot weather

They are too expensive

They are difficult to clean

They do not give enough protection

10 / 20

Which of the following is considered a distracting activity that can result in fines under the Traffic Safety Act?

Using a hand-held cell phone

Shoulder checking before changing lanes

Checking mirrors

Using turn signals

11 / 20

How should boot laces be managed when riding?

Wrapped around the foot pegs

Tucked in to prevent them catching on the motorcycle

Tied in long loops

Left loose for flexibility

12 / 20

What is one way to help other road users see you better when riding?

Ride only in the right lane

Wear gear and clothing with colours

Always ride with high beams off

Avoid reflective materials

13 / 20

In cold or wet weather, what type of clothing should you wear?

Proper clothing that helps keep you warm and dry

Any clothing, as long as you have a helmet

Loose clothing that lets air flow freely

Only a rain poncho

14 / 20

Which material is recommended for motorcycle boots or footwear?

Canvas only

Rubber sandals

Leather or sturdy synthetic material

Thin nylon

15 / 20

Why is wind noise a hazard for motorcycle riders?

It only affects comfort, not safety

It only makes it hard to talk to passengers

It can lead to fatigue and cause permanent hearing loss

It is only noticeable at low speeds

16 / 20

How can medications affect your riding?

Over-the-counter medications have no effect

Only prescription drugs are a concern

They may affect your ability to judge and react

They always improve concentration

17 / 20

Which type of jacket and pants offers only minimum protection and can wear through quickly when skidding on a road surface?

Leather riding suits

Textile riding gear with armour

Denim jackets and pants

Kevlar-reinforced riding jeans

18 / 20

Which of the following should you never do before riding?

Be aware of medication effects

Ensure you are well rested

Check your mental and physical condition

Ride after drinking alcohol or using drugs

19 / 20

What should you do if you need to use a cell phone while riding?

Use it while riding at low speeds

Stop at a safe location at the side of the road

Text only at traffic lights

Hold it in one hand and steer with the other

20 / 20

Proper footwear for riding should:

Have tall, sharp heels

Be open-toed for ventilation

Cover your ankles

Be made of soft fabric

Your score is

This section emphasizes the importance of conducting thorough pre-ride inspections to ensure the motorcycle is in top condition. Riders learn to check tire pressure, brakes, lights, and fluid levels. The chapter also covers the significance of wearing appropriate protective gear, including helmets, jackets, and boots, to enhance safety. Additionally, it focuses on understanding controls and developing situational awareness, enabling riders to anticipate and react to various road conditions. Mastering these elements fosters confidence and readiness for safe motorcycle journeys.