Chapter 3-2: Driver conduct

The “Driver Conduct” section of the Ontario truck driver knowledge test focuses on the behavior and responsibilities expected from commercial drivers.

Ontario Truck Driver Test - Chapter 3-2: Driver conduct

1 / 10

For which vehicles do the speed limiter requirements apply?

Commercial motor vehicles manufactured in 1995 or newer, with MGVWR of 11,794 kg (26,000 lbs.) or more and an electronically controlled engine

Only buses and motor homes

Only vehicles used exclusively in urban areas

All vehicles regardless of year, weight, or engine type

2 / 10

Which of the following BEST describes the general driving approach expected of responsible truck drivers?

Be a defensive driver, anticipate what other drivers might do, and compensate for them

Drive at the maximum legal speed at all times

Focus only on your own vehicle and let others adjust to you

Use your size to control the flow of traffic

3 / 10

What problem is caused when a truck pulls out to pass another large vehicle with only a very small speed difference?

It obstructs following traffic for an unreasonable period of time

It reduces the need for signaling

It improves fuel economy for both vehicles

It increases braking efficiency

4 / 10

To what maximum speed must the speed-limiting system of applicable commercial motor vehicles be set?

No more than 105 km/h (65 mph)

No more than 90 km/h (55 mph)

No more than 120 km/h (75 mph)

No more than 110 km/h (68 mph)

5 / 10

Which of the following is an example of improper passing by a truck driver?

Pulling out when traffic is too close and dense, immediately after signaling

Waiting for a large, clear gap before changing lanes

Checking mirrors and blind spots thoroughly before passing

Returning to the lane only after you see the vehicle you passed in your mirror

6 / 10

On a highway at speeds exceeding 60 km/h (40 mph), what minimum following distance must commercial motor vehicles maintain from other vehicles (except when overtaking and passing)?

At least 30 metres (100 ft.)

At least 100 metres (330 ft.)

At least 60 metres (200 ft.)

At least 20 metres (65 ft.)

7 / 10

When several trucks are pulling onto a highway after a stop, how should they enter traffic?

As close together as possible for drafting

At intervals that allow sufficient space between vehicles

Side by side in multiple lanes

All at once to minimize disruption

8 / 10

Why should you never use your left-turn signal to tell following motorists it is safe to pass?

It disables your brake lights

It wastes fuel

It is against the law and can confuse others about your intentions

It is only allowed at night

9 / 10

What is a recommended practice when your truck must slow down on hills and cannot keep up with traffic speed?

Turn on your left-turn signal to let others pass

Move to the left lane and increase speed

Stop on the shoulder until traffic clears

Stay to the right and activate your hazard lights

10 / 10

What is “bluffing” in the context of truck driving conduct?

Using the large size of the vehicle to intimidate others and force a way through traffic

Using hazard lights in poor weather

Slowing down to allow others to merge

Signaling well in advance before every turn

Your score is

It covers professional attitude, respect for other road users, and adherence to traffic laws. Drivers are required to remain alert, avoid distractions such as mobile phones, and never drive under the influence of drugs or alcohol. The section also emphasizes courteous driving, such as yielding when appropriate and using signals to communicate intentions. Maintaining honesty in logbooks and compliance with hours-of-service regulations are crucial. Proper driver conduct ensures road safety and upholds the trucking industry’s reputation.