Series 5-17: Restraint Cutters

The “Restraint Cutters” section of the Alberta School Bus Knowledge Test educates drivers on the proper use and importance of restraint cutters in emergencies.

Alberta School Bus Test - SERIES 5-17: Restraint Cutters

1 / 5

During practice evacuation procedures, what should you do regarding a passenger in a wheelchair?

Ask another student to practice removing the passenger

Leave the passenger unattended while others practice evacuating

Do not take the passenger out of their wheelchair, but explain what would happen in a real emergency

Always remove the passenger from the wheelchair to simulate a real emergency

2 / 5

What is the primary purpose of the restraint cutter?

To remove debris from the bus floor

To cut open packages in the cargo area

To quickly remove tie-down straps or other occupant restraints in an emergency

To trim loose fabric on seats

3 / 5

What must you do before conducting an evacuation drill?

Turn off the bus radio

Remove all equipment from the bus

Notify school officials

Send a note home with students

4 / 5

If you have a passenger on the bus and the wheelchair lift fails due to power or equipment issues, what should you do?

Operate the lift manually, following the manufacturer’s instructions

Cancel the trip and wait for a mechanic without moving the lift

Attempt to repair the lift yourself without instructions

Ask the passenger to walk off the bus if possible

5 / 5

Where should the restraint cutter be stored on the bus?

In a locked compartment outside the bus

In the back of the bus near student seating

In the wheel well next to the tires

In a location easily accessible to the bus operator but out of easy reach of passengers

Your score is

Restraint cutters are specialized tools designed to quickly and safely cut through seat belts or safety restraints if they become jammed or inaccessible during an emergency, such as a fire or accident. Drivers must know the cutter’s location, typically mounted in an easily accessible area. Regular inspection ensures the cutter remains functional. Proper training in the use of restraint cutters is essential for rapid student evacuation, helping prevent injuries and save lives when seconds matter most.