Chapter 2-3: Do a pre-vehicle check

The “Do a Pre-Vehicle Check” section of the Ontario motorcycle practice test highlights the importance of inspecting your motorcycle before every ride.

Ontario Motorcycle Test - Chapter 2-3: Do a pre-vehicle check

1 / 20

What type of tire damage can be especially dangerous on a motorcycle?

Slight discoloration

Small stones in the tread that fall out

A blowout

Dust on the sidewall

2 / 20

Why is proper tire tread important?

It makes the motorcycle quieter

It improves fuel economy only

It helps prevent skidding, especially on wet pavement

It is only for appearance

3 / 20

How should you check the brakes before riding?

Test them only while riding at high speed

Squeeze both brakes lightly at the same time

Only test the rear brake because it is used most

Try front and rear brakes one at a time to ensure each will hold the vehicle when fully applied

4 / 20

Is checking mirrors enough before changing lanes on a motorcycle or moped?

No, you must still look over your shoulder

Yes, if traffic is light

Yes, during the daytime only

Yes, if the mirrors are adjusted properly

5 / 20

Which of the following is the main reason motorcycles and mopeds require more attention and upkeep than cars?

Problems on a motorcycle usually have more severe consequences for the rider

Motorcycles are cheaper than cars

Mopeds have smaller engines

Motorcycles are always driven faster than cars

6 / 20

When must a motorcycle use its headlight and tail light?

Only in bad weather

Only at night

Only on highways

At all times of day and night

7 / 20

On a motorcycle or moped you are unfamiliar with, what is especially important to test before riding?

The brakes

The seat comfort

The horn volume

The paint condition

8 / 20

What should happen when you release levers, pedals, and switches on your motorcycle or moped?

They should move slowly and stick a little

They should need to be pulled back by hand

They should spring back to their original position

They should stay where you left them

9 / 20

When should you perform a pre-vehicle check on your motorcycle or moped?

Only before long trips

Only when you think something is wrong

Every time before you drive it

Once a month

10 / 20

What color must the headlight on a motorcycle or moped be?

Yellow

Amber

Blue

White

11 / 20

What part of the motorcycle should you check for loose bolts?

The chassis

The mirrors

The seat

The licence plate

12 / 20

For mopeds, when is it recommended to use the full lighting system?

Only at night

Only when it is raining

At all times to enhance safety

Only when riding in the city

13 / 20

What is a key limitation of convex mirrors on a motorcycle or moped?

They show a smaller field of view

They only work at night

They make other vehicles look farther away than they really are

They are illegal to use

14 / 20

What must illuminate the licence plate on a motorcycle or moped?

A flashing amber light

A white light

A blue light

A red light

15 / 20

How should motorcycle mirrors be adjusted?

To see about half the lane behind you and as much of the lane beside you as possible

To show only the lane directly behind you

To show mostly your shoulders

To show only the lane beside you

16 / 20

When should you adjust your mirrors?

Only if carrying a passenger

While you are driving, to match traffic

Only if you plan to drive at night

Before you start driving

17 / 20

How should you check tire pressure on a motorcycle or moped?

By kicking the tire to see if it feels firm

By squeezing the tire with your hand

With an air-pressure gauge when the tires are cold

After riding so the tires are warm

18 / 20

What should you look for when inspecting cables on a motorcycle or moped?

Kinks, binding, or broken strands

Whether they are shiny

The brand name

Their color

19 / 20

What color must the rear or tail light on a motorcycle or moped be?

White

Red

Amber

Blue

20 / 20

If you don’t know the correct tire pressure, what should you do?

Inflate to the maximum number on the air pump

Use the same pressure as a car tire

Check the owner’s manual or ask the manufacturer

Guess based on how the tire looks

Your score is

This section teaches riders to examine critical components such as tires, brakes, lights, signals, and fluid levels to ensure everything is in proper working order. Checking for leaks, loose parts, or any visible damage is also emphasized. These routine inspections help prevent mechanical failures and enhance road safety. By mastering this section, riders develop good habits that protect both themselves and others. Consistently performing pre-ride checks is essential for safe, confident, and responsible motorcycling in Ontario.